Cabinet Knobs 4 Pack Crystal Pendant Pull Glass Door Handle Leaf-Shaped Drawer Suitable for Cabinets Wardrobes Home Decoration(Rose Gold)

Material: High-quality crystal glass + high-grade zinc alloy baseBright zinc alloy, anti-corrosion, widened smooth baseEnsure the handle will not tear or move during useNot easy to discolor after long-term use, and it is more convenient to clean, just wipe it with water and clothNote:The screws for the cabinet handles are 2.2 cm/0.87 inches,so the drawer knobs are only suitable for 1.8 cm/0.71 inch thick boards,Please check the thickness of your furniture before purchasing.If you need screws of other lengths,Please contact us and we will send you the screws of the required length,Thank you very much.Application:Suitable for drawers, dressing tables, wine cabinets, dressing tables, cabinets,wardrobes, bedside tables, folding doors, mirrored furniture, bathroom cabinets, bedroom closet kitchen cabinets, etc. Use these cabinet knobs to update your kitchen cabinets,children's rooms or bathroom vanities. Installation steps:1.Determine the installation location2.Drill a hole with a diameter of 0.16 inches (M4) for the screw3.Fix the knob handle with the screw4.Installation completedWarm Tips:1.Please allow 1-3 mm error due to manual measurement. Please make sure you do not mind before ordering. 2.Due to different displays, the color may be different, please understand. 3.Do not use corrosive liquid to clean the surface. Wipe with a soft cloth.

• These knobs are perfect for wardrobes, drawers, and shoe cabinets.
• You will get 4*crystal drawer handles, 4 M4*22mm screws, suitable for door panels with a thickness of 18mm, if you need screws of other lengths, please contact us and we will send the length you need
• PIYYQNY our drawer knobs are made of crystal glass, the base is zinc alloy chrome plated, anti-corrosion, safe and easy to clean, can last for years so you don't have to spend too much on cabinet pulls
• mark the position on the board where you want to install the crystal knob, then drill a hole in the board, pass the screw through the hole, tighten the screw to secure the knob
• 25mm