Flotec Fp4032 Thermoplastic Shallow Well Jet Pump, 1 Hp

Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25' or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM. Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified.

• Perfect for shallow wells (depth-to-water less than 25'), Thermoplastic construction for higher corrosion resistance, 1-1/4" Suction / 1" Discharge, Comes with pre-wired 30/50 pressure switch,NOTE: Returns will not be ACCEPTED if item has been INSTALLED or there should be no signs of installation. Must be returned in the Same Packaging as received.
• Body Construction : Thermoplastic, 1 Horsepower, Maximum Capacity : 18 GPM, Flow at 10' Lift and 40 PSI : 16.1 GPM
• Max Lift : 25', Maximum Pressure : 67 psi, Pressure Switch Setting : 30/50, Suction Pipe Size : 1-1/4" NPT
• Discharge Pipe Size : 1" NPT, Amp Draw (full load) : 9.6 amps on 230v / 19.2 amps on 115v, Voltage : 230v / 115v, 60 Hz
• Recommended Breaker : 15 amp on 230v / 25 amp on 115v, Maximum Water Temperature : 140 °F (60 °C),Note : All Pumps, Are Tested By The Manufacture, Prior To Shipping. At Times You Will Encounter A Smalll Amount Of Water Residue Left Over From The Test.